Keurig pump problems
Keurig brewing method is quite famous with people these days. Busy times and routines call for quick actions. Therefore Keurig is the best choice to get a cup of coffee instantly.
This ease can turn into distress if the Keurig is not working properly. Imagine you are in a rush, you set up the Keurig and go to get ready for office. You come back and your wonderful coffee is not ready. Keurig cheated on you.
Do not worry we have some main areas of problem. These will help you figure out why your Keurig is not working. For instance, mainly Keurig machines stop pumping water. On the other hand, it may start making excessive noise, etc.
Now the point is that why these problems occur. There must be some root cause. For this purpose, we are here. To ace your coffee life we do our best. So let us have a detailed insight into these Keurig problems.
Keurig problem with water flow
Water is the most essential component of coffee. Therefore its flow acts vital in brewing. If the water is flowing at the efficient speed you get the righty infused taste of the coffee. Keurig machines work on single servings or k-cups. You need not worry about the coffee quantity and the rest of the things.
Water flow can give you a hard time. For instance, we can have two kinds of water flow problems with Keurig. These are the following.
Keurig not pumping enough water
Water flow can be disturbed due to scaling in the pipes. Coffee brewing needs hot water. Therefore there can be debris or limescale deposited in the pipes. This deposit may stop o reduce the water flow. Consequently, your coffee will not be as you want. Also, the quantity will be lesser than you want.
Now that we know the problem let us move towards the solution. The limescale issue can be resolved if you maintain your machine regularly. For instance, you must clean up the water reservoir daily. Other than this try to keep up with weekly or monthly maintenance. For this purpose, you need to clean up the whole machine thoroughly.
Prepare your descaling or debris removing solution at home. Add a 3:1 ratio of water and vinegar in a bowl. Transfer it into the water reservoir and start the brewing cycle. This process will clean up the pipes and water valve entirely. Thus it will result in the proper pumping of water in your Keurig.
Keurig will not stop pumping water
The deadly scaling problem has its effects in two ways. It can stop the water flow and can cause unstoppable water flow. By this, you can get a lot of mess on your coffee counter. Other than this, water may leak inside the machine which can make your Keurig stop working. So to save yourself from this heck, you need to work on your machine.
For this purpose repeat the same cleaning process. Descale the machine thoroughly. Run a water cycle to check on it and you are ready with a new Keurig machine.
Keurig air pump problems
Technology has a lot of benefits with regrets sometimes. Yes, the machinery is quite difficult to understand. One problem can lead to another one. Therefore we face various technical issues once the machine stops working.
One of the similar problems is with the air pump of Keurig. When the water pumping system is disturbed it directly or indirectly affects the air pump. This malfunction causes a complete shutdown of the Keurig.
The inner water leakage of Keurig causes the air pump to stop. It is the air pump that pushes the hot water to the k-cups for coffee brewing. So if it stops working you cannot brew coffee with your coffee anymore.
To get rid of this problem you may need to take it to the repairer or get a new one. Worry not we have another moderate solution for you. You can simply change or reinstall the air pump. You can get your hands on this from the market easily and it’s available on Amazon as well.
So in this way you can get back to your coffee routine at a lesser expense. For future purposes make sure to keep the maintenance on the go. Otherwise, your passion for coffee will go off the road and will cost you much.
Keurig making a grinding noise
Keurig machines need not grind the beans it works on k-cup. Still, you get to hear the grinding sound from the machine then it is problematic. Do not run your horses, we are here for you. This noise occurs due to the air present in the water pump. That makes the water pumping difficult and nearly impossible and results in this gross grinding noise.
To solve this issue try refilling the water tank and shaking out the machine. This step may help you in getting the extra air out of the Keurig. If not successful in the mission then surely go to the repairer or exchange the machine if it is new.
How to fix a Keurig
We have been telling you with time how to deal with the problems of Keurig. This time we will go into the depth of solutions so that you can save some pennies on new machines.
First of all, we will advise you to clean your Keurig daily. So my rinse the water reservoir after use. Other than this you can add some lemon juice to the water and run a brew cycle. This trick will surely help you in keeping the debris and scaling away.
Secondly, we have monthly or weekly cleaning as per your convenience. For this purpose, you need to get hold of some limescale solution. You can get it from the market and make it at home as well. Make a mixture of water and vinegar in 3:1 ratio. Other than this you can have the solution of vinegar and baking soda. This cleaner is quite famous for its WOR, it does magic with limescale and debris.
Lastly, you can check for the water pump and air pump condition. If not in your understanding you can get it to the expert or simple exchange from the company.
Thus in these simple ways and tricks, you can make your Keurig go a long way with you. Try to be humble with your Keurig and it will brew you a lot of coffee.
P.S. you can use these steps of cleaning or fixing the Keurig machine with almost every model of Keurig coffee maker. For instance, you can use them with Keurig f10 mini, Keurig k35, and many more. Unless the brand is the same you can cure it with these DIYs.
For the love of coffee, we are always after sorting out the problems and finding easy solutions. This aim keeps us going and we can help the wandering coffee souls. Among these are the ones who are facing problems with their Keurig machines. Either it is not pumping water at all or does not stop pumping water. Both the ways it is super exhausting to set everything right we have some DIYs to keep the cycle going.
On the other hand, the lifetime rule is the maintenance. If you maintain your Keurig and prevent it from debris and limescale you won’t face these hideous issues. Also, the replacement of water and air pump can get you out of the noisy and messy situation of Keurig.
So keep an eye on your Keurig. Notice its pumping speed and noise. Replace the water quite often. Keep the reservoir clean and you are free from any hassle of repairing the Keurig. Happy brewing from us to you!
Read More: How To Get Water Out of Keurig
1: How to unclog a Keurig?
For this, you need to be a little technical. Turn off your machine and open up the lid to reveal the inner machinery. Now take a needle or any tiny pointed thing to pass through the pores. Cross the needle through the clogged pores and get the scales out. In this way, you can unclog the Keurig.
2: How to fix a Keurig that won’t brew?
There can be multiple problems with your Keurig if it is not brewing. The water pump may be affected. There can be air stuck in the pump or the pores are clogged. For all these, you need to look thoroughly into your Keurig machine. Restart it after cleaning it up. Hope it works well and brews great coffee for you.
3: How to get water out of Keurig?
Drain the water through the drip tray. Other than this tilt over the water reservoir and get all the water out. To be on the safer side try brewing plain hot water and it will get you all the water out in your mug.
4: What causes a coffee maker to stop working?
Internal leakage and blocking can be the main reasons for a coffee maker to stop working. For instance, overheating of the wires or excessive spilling of water and coffee particles in the pipes, all of this can cause your coffee maker to stop.
5: How do you reset the water reservoir on a Keurig?
It is quite simple. Turn off and unplug the Keurig machine. Take off the water reservoir, empty and clean it. Reassemble the machine by putting the reservoir back in place. Provide the power and it is ready to use.
6: How long does a Keurig last?
Ideally, a Keurig can last up to 5 years. Other than this it depends on the quality of your product. Plus the maintenance can also add up to the shelf life of the Keurig.
- 1 Keurig pump problems
- 2 Keurig problem with water flow
- 3 Keurig air pump problems
- 4 Keurig making a grinding noise
- 5 How to fix a Keurig
- 6 Conclusion:
- 7 FAQs: